SkyRC Power Switch 4-12V 10Amp

Product information "SkyRC Power Switch 4-12V 10Amp"

A tiny microprocessor controlled on & off switch from SKYRC for RC models.

A push button serves as a switch and thus eliminates the well-known problems such as loose contacts or the like that often arise with mechanical switches. The plastic housing is sealed and, thanks to its compact size, can be installed almost anywhere in the model with double-sided adhesive tape, but with the three mounting holes it also finds optimal space on the transponder bracket.

Two different snap covers are included for the user to choose.

This switch also supports LiPo mode, this activated switch is automatically off when the voltage is too low to protect the LiPo from deep discharge. Of course, this mode can be deactivated if other protective devices are already in place or the switch is running in NiMH/NiCd mode. In addition, the switch informs you at all times about the current capacity status of the battery.

Switch structure:

1. NiMH/NiCad battery packs To turn on, press and hold the switch for one second. The Power "PWR" LED will now light up. To turn off, press and hold the switch until all LEDs are off. The Power "PWR" LED signals you when switching on the crystal capacity of the battery.

2. LiPo battery packs To turn on, press and hold the switch for more than three (3) seconds. The Power "PWR" LED and LIPO LED will now light up. To turn off, press and hold the switch until all LEDs are off. The Power "PWR" LED signals you when switching on the crystal capacity of the battery.

Technical specifications:

Input voltage: 4-12V Maximum current: 10 amps

Battery mode:

1. NiHM / NiCad

2.LiPo LiPo undervoltage protection: 6.2V (LiPo)

Operating temperature: 0-50°C

Weight: =7g